Home  |   Contact Us
Home   »   Produk   »   Incubator Laboratorium

Incubator Memmert IN 30 plus


The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.



Working temperature range
: Min. 10°C above ambient up to +80°C
Setting accuracy temperature
: 0.1°C
: 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and   taking over the performance at the same temperature value



Control technology

: TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor               controller with 2 high-definition TFT-colour displays.
Language setting
: German, English, Spanish, French, Polish, Czech, Hungarian
: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
: the process time does not start until the set temperature is reached
: three freely selectable temperature values
adjustable parameters
: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
: fixed sterilisation programme (4 hours/160°C) for sterilisation of working   chamber, not for sterilising the load




: forced air circulation by quite air turbine, adjustable in 10 % steps for each     segment individually.
Fresh air admixture
: adjustment of pre-heated fresh air admixture by air flap control in 10 %         steps for each segment individually.
: vent connection with restrictor flap.




Temperature control
: Mechanical temperature limiter TB, protection class 1 according to DIN       12880 to switch off the heating approx. 20°C above nominal temperature
Temperature control
: overtemperature monitor TWW, protection class 3.1 or adjustable             temperature limiter TWB, protection class 2, selectable on display
: additionally integrated over- and undertemperature monitor "ASF",           automatically following the setpoint value at a preset tolerance range,       alarm in case of over- or undertemperature, heating is switched off in       case of overtemperature
Autodiagnostic system
: for fault analysis
: visual and acoustic